search
catalogue_logo

HAM-LET 目录

下载 PDF 目录

网上学院

技术查询表

在线检测证书服务

decoration
decoration

HAM-LET Movie

气动执行器系列

对于在流量和阀门工程领域从事设计的工程师、设计师和制造商,大多数都需要理解使用特定产品所涉及的各方面和流程。
阅读更多 ››

 
新的在线检测证书服务

下载在线 COT(测试证书,Ham-Let 产品) 此服务仅供注册用户使用。
阅读更多 ››

图纸下载

客户图纸仅仅提供给已注册的用户。

如果您已经注册了,请登录。如果您尚未注册,请 立即注册。.

  • 规格
  • 功能
HSSC202BH
316 不锈钢
1/4″ NPT 内螺纹
500 cc (30.5 in³)
1800 psi (124 bar)
2.5 lb (1.13 Kg)

APPLICATION:

Sampling Cylinders permit the extraction of a sample from a remote process location and provide safe containment for storage and transportation to the laboratory for analysis. These cylinders are rated to 1800 psi at room temperature for liquids and gases. Some applications include hydrocarbon sampling in refineries, gas sampling in chromatography and condensate sampling in fossil-fuel and nuclear-power plants. In similar applications, petrochemical facilities and gas processing plants utilize sample cylinders. Pressure surge accumulators or reaction vessels are other common uses for sample cylinders.

Transportation Specifications: DOT-3E1800 per 49CFR 178.42

Material Traceability

Raw material is heat code traceable. This traceability follows each cylinder through manufacture, heat treating, cleaning and pressure testing.

Cylinder Manufacturing Standards

DOT CFFC, FRP-1, FRP-2, 3A, 3AA, 3AL, 3E, 3HT, 39, NGV2, FMVSS, HSE FW1/FW2, TUV, KHK, MIL-C-7905, MS26545, MIL-R-8573, EN1975, 12245 and others.

Approval of T.P.E.D. { Transportation Pressure Equipment Directive} is imminent.

Applicable Valves with Sample Cylinders

HAM-LET H-300 Needle Valve Series.

Notes:

• Cylinder manufactured and inspected in accordance with DOT ‘49 CFR 178.42 Specification 3E.
• Material: seamless cold-finished stainless steel tubing per ASTMA269.
• Lot size 500 cylinders.
• Heads formed using spinning process.
• Sandblast inside surfaces.
• Thread ends per ANSI B1.20.1.
• Part free of grease, machine oil & other debris inside and out. Acid wash and rinse with deionized water.
• Rotation sand entire cylindrical outer surface to finish 32μInch.
• Destructive acceptance criteria (one cylinder per lot) per DOT 3E: - Cylinder burst between 6,000 and 12,000 psi without fragmentation; or -Cylinder holds 12,000 psi for 30 seconds without burst, and withstands flattening test to six times wall thickness without cracking.
• Non-destructive acceptance criteria (all cylinders) per DOT 3E: hydrostatic proof test at 3,000 +100/- 0 psi for 30 seconds minimum without failure or evidence of defect.
• Cylinder operating pressure: 1800 psi.

 

POA